EagleTac DX30LC2-R Kit CREE XP-L HI V3 Cool White LED Flashlight

Sale price$124.99 CAD



The DX30LC2-R is a rechargeable light that has a compact all-in-one design. Uses CREE XP-L HI V3 Cool White LED which gives a high performance of 1160 LED lumens at astonishing maximum beam distance of 288 meters that runs up to 200+ hours. The Kit version brings additional goodies such as crenulated stainless steel bezel, upgraded 18650 li-ion battery from 2600mAh to 3500mAh battery (authentic Sanyo Japan cell) and UL certified USB 5V 1A wall charger (100V-240V).

EagleTac DX30LC2-R Kit

LED Brightness Level Waterproof Specifications (Width, Length, Diameter) Weight Battery
CREE XP-L HI V3 Cool White LED 5 brightness levels IPX-8 132mm (L)x22 mm (Body Dia.)x22.5mm(Head Dia.) 60 grams EAGTAC li-ion 18650 3500mAh 
    • LED: CREE XP-L HI V3 Cool White LED
    • Max output: LED lumen: 1160, ANSI FL-1 lumen: 905
    • Reflector: Light textured aluminum reflector
    • Material: HAIII hard anodization aerospace aluminum
    • Waterproof: IPX-8 standard
    • Lens: Waterwhite glass lens w/ harden treatment
    • Lens: Anti-reflective (AR) coating on both side (96% transparency)
    • LED direct soldering on copper for maximum heatsink ability
    • User replaceable glass lens
    • Battery reverse polarity protection
    • Ultra low internal resistance phosphor bronze springs (silver coated)
    • Spring loaded positive and negative terminal
    • Bi-directional pocket clip design
    • Built-in li-ion charger
    Beam Profile
    • CREE XP-L HI V3 Cool White LED 

      • Center lux: 20,800 lux
      • Center spot angle: 5.2°
      • Spill light angle: 62°
      • Beam distance: 314 yards / 288 meters
          Five brightness levels
          • Led lumen: 1160-980/590/221/77/9
          • ANSI FL-1 lumen: 905-790/475/178/62/7
          Runtime (Regular mode)
          • 1.5/2.8/8.5/28/200+ hours (1x18650)
          • 0.8/1.5/5/17/140 hours (2xCR123A)
          Three hidden auxiliary outputs
          • Disorienting Strobe/Beacon (1.67Hz)/S.O.S.
          • Head Diameter: 0.9 inches (22.5 mm)
          • Body Diameter: 0.85 inches (22 mm)
          • Length: 5.2 inches (132 mm)
          • Weight: 2.1 ounces (60 grams), w/o battery
          • Weight: 3.7 ounces (106 grams), w/ battery
          • DX30LC2-R Kit flashlight
            • Crenulated stainless steel bezel
            • EAGTAC li-ion 18650 3500mAh battery (authentic Sanyo Japan cell)
            • UL certified USB 5V 1A wall charger (100V-240V)
            • Rigid nylon holster w/ retention device
            • (US only) UL certified/listed, PSE certified/listed 12V 1A wall miniature charger
            • Heavy duty nylon holster
          • Spare o-rings
          • User Manual
          • Mil-Spec Para-cord Lanyard w/ quick attachment clip
          • CR123A Battery Magazine
          • Comes with stainless steel bezel
          • Removeable silver pocket clip made of spring steel w/ harden treatment
          • USB charging cable ( 3.3feet / 1meter ) w/ AWG24 copper wire
          • EAGTAC 18650 Li-ion battery included
        • Ensure the protective circuit on the 18650 battery pack has current limitation of higher than 5A. Always use proven EAGTAC batteries for best performance and reliability.

          All EAGTAC flashlights are designed to use button-top battery (battery with protruding positive terminal). For rechargeable li-ion battery, use only EAGTAC li-ion battery, or other protected li-ion battery with compatible length and diameter. Before using the battery, check and ensure the battery outer wrapping (the isolating plastic film that wraps around the metal housing of the battery) is complete. Broken battery wrapping may lead to short circuit and damage to the flashlight.

          Lithium and Li-ion battery can explode or cause burns if disassembled, shorted, or exposed to high temperature. Do not mix new and used batteries. Do not mix batteries with different brand, capacity, voltage, or install batteries backwards.

          NiMH rechargeable battery may release gas during discharge. If you experience an inflated switch boot or find high pressure being built inside the flashlight, switch off the flashlight immediately. Slowly loosen the tail-cap to reduce the internal pressure and replace all batteries.  

          You may also like

          Recently viewed