EagleTac T25LR XHP-35 HD CW KIT

• Head Diameter:1.3 inches (33 mm)
• Body Diameter: 1 inches (25.4 mm)
• Length: 5.9 inches (149 mm)
• Weight: 4.6 ounces (130 grams)w/o battery
                6.3 ounces (180 grams)w/ battery

• T25L-R flashlight
• Spare o-rings
• User Manual
• Mil-Spec Para-cord Lanyard w/ quick attachment clip
• Removable darken pocket clip made of spring steel w/ harden treatment
• Type-C (bi-direction insert) USB charging cable (3.3feet/1meter) w/ AWG24 copper wire
• Kit
• Crenulated aluminum black bezel
• EAGTAC 18650 3500mAh li-ion battery (8A High discharge protection pcb built-in at anode) authentic Sanyo GA cell
• Add-on diffuser filter with flip-cover feature
• Heavy duty nylon holster
• (US only) UL certified 5V 1A USB charger

Ensure the protection circuit on the 18650 battery to have current trip of 8A or higher (EAGTAC 18650 2600mAh and 3500mAh (Sanyo GA cells) with protection PCB built-in at anode both have 8A trip current). Always use proven EAGTAC batteries for best performance and reliability. Safe chemistry IMR 18650 li-ion are also supported, however use it with precaution as they are unprotected.

All EAGTAC flashlights are designed to use button-top battery (battery with protruding positive terminal). For rechargeable li-ion battery, use only EAGTAC li-ion battery, or other protected li-ion battery with compatible length and diameter. Before using the battery, check and ensure the battery outer wrapping (the isolating plastic film that wraps around the metal housing of the battery) is complete. Broken battery wrapping may lead to short circuit and damage to the flashlight.

Lithium and Li-ion battery can explode or cause burns if disassembled, shorted, or exposed to high temperature. Do not mix new and used batteries. Do not mix batteries with different brand, capacity, voltage, or install batteries backwards.

NiMH rechargeable battery may release gas during discharge. If you experience an inflated switch boot or find high pressure being built inside the flashlight, switch off the flashlight immediately. Slowly loosen the tail-cap to reduce the internal pressure and replace all batteries.