Description
EagleTac T25LR XHP-35 HD CW KIT Spec
| Tactical Flashlight | YES |
|---|
| LED | Brightness Level | Waterproof | Specifications (Width, Length, Diameter) | Weight | Battery |
|---|---|---|---|---|---|
| CREE XHP35 HD E4 Cool White LED | 3 brightness levels | IPX-8 | 149 mm (L)x25.4 mm (Body Diameter)x33 mm(Head Dia.) | 130 grams |
|
-
- LED: CREE XHP35 HD E4 Cool White LED
- Max output: LED lumen: 2000, ANSI FL-1 lumen: 1603
- Reflector: Smooth aluminum reflector
- Material: HAIII hard anodization aerospace aluminum
- Waterproof: IPX-8 standard
- Waterwhite glass lens w/ harden treatment
- Anti-reflective (AR) coating on both side (96% transparency)
- LED direct soldering on copper for maximum heatsink ability
- User replaceable glass lens
- Battery reverse polarity protection
- Ultra low internal resistance phosphor bronze springs (silver coated)
- Spring loaded positive and negative terminal
- One piece head design for maximum heat transfer
- Tailcap battery stabilizer design to prevent battery movement inside the battery tube
Beam Profile-
Beam Profile
CREE XHP35 HD E4 Cool White LED
- Center lux: 21,200 lux
- Center spot angle: x°
- Spill light angle: x°
- Beam distance: 317 yards / 291 meters
- Led lumen: XHP35 HD E4: 2000-1430/434/43
- ANSI FL-1 lumen:XHP35 HD E4: 16035-1204/365/35
- 18350 li-ion Runtime: (XHP50.2) 0.15-0.25/0.35/1.2/3.5/20 hours
- 18650 (w/ extension tube) li-ion Runtime:(XHP50.2) 0.8-1.2/1.8/5.5/17/100 hours
-
- Head Diameter:1.3 inches (33 mm)
- Body Diameter: 1 inches (25.4 mm)
- Length: 5.9 inches (149 mm)
-
Weight: 4.6 ounces (130 grams)w/o battery
6.3 ounces (180 grams)w/ battery
-
- T25L-R flashlight
- Spare o-rings
- User Manual
- Mil-Spec Para-cord Lanyard w/ quick attachment clip
- Removable darken pocket clip made of spring steel w/ harden treatment
- Type-C (bi-direction insert) USB charging cable (3.3feet/1meter) w/ AWG24 copper wire
- Kit :
- Crenulated aluminum black bezel
- EAGTAC 18650 3500mAh li-ion battery (8A High discharge protection pcb built-in at anode) authentic Sanyo GA cell
- Add-on diffuser filter with flip-cover feature
- Heavy duty nylon holster
- (US only) UL certified 5V 1A USB charger
-
Ensure the protection circuit on the 18650 battery to have current trip of 8A or higher (EAGTAC 18650 2600mAh and 3500mAh (Sanyo GA cells) with protection PCB built-in at anode both have 8A trip current). Always use proven EAGTAC batteries for best performance and reliability. Safe chemistry IMR 18650 li-ion are also supported, however use it with precaution as they are unprotected.
All EAGTAC flashlights are designed to use button-top battery (battery with protruding positive terminal). For rechargeable li-ion battery, use only EAGTAC li-ion battery, or other protected li-ion battery with compatible length and diameter. Before using the battery, check and ensure the battery outer wrapping (the isolating plastic film that wraps around the metal housing of the battery) is complete. Broken battery wrapping may lead to short circuit and damage to the flashlight.
Lithium and Li-ion battery can explode or cause burns if disassembled, shorted, or exposed to high temperature. Do not mix new and used batteries. Do not mix batteries with different brand, capacity, voltage, or install batteries backwards.
NiMH rechargeable battery may release gas during discharge. If you experience an inflated switch boot or find high pressure being built inside the flashlight, switch off the flashlight immediately. Slowly loosen the tail-cap to reduce the internal pressure and replace all batteries.