EagleTac DX3B Mini Pro XH-P50.2 CW

• Head Diameter: 0.9 inches (22.5 mm)
• Body Diameter: 0.85 inches (22 mm)
• Length: 3.4 inches (86 mm)
• Weight: 2.6 ounces (75 grams, Product weight exclude battery

• DX3B-M Pro flashlight
• Crenulated stainless steel bezel
• Harden stainless steel deep pocket
  two-way clip with titanium alloy dark vacuum coated finish
• Tailstand tailcap with magnet
• Battery extension tube for single 18650 li-ion battery
• (US only) UL/PSE certified USB 5V 1A wall charger (100V-240V)
• (EU only) TUV/CE certified USB 5V 1A wall charger (100V-240V)
• Rigid nylon holster w/ self-retention device

• 3.7V 800mAh IMR18350 rechargeable unprotected li-ion battery
• Spare o-rings
• User Manual
• Mil-Spec Para-cord Lanyard w/ quick attachment clip
• Micro USB USB charging cable ( 3.3feet / 1 meter ) w/ AWG24 copper wire

Ensure the protective circuit on the 18650 battery pack has current limitation of higher than 5A. Always use proven EAGTAC batteries for best performance and reliability.

All EAGTAC flashlights are designed to use button-top battery (battery with protruding positive terminal). For rechargeable li-ion battery, use only EAGTAC li-ion battery, or other protected li-ion battery with compatible length and diameter. Before using the battery, check and ensure the battery outer wrapping (the isolating plastic film that wraps around the metal housing of the battery) is complete. Broken battery wrapping may lead to short circuit and damage to the flashlight.

Lithium and Li-ion battery can explode or cause burns if disassembled, shorted, or exposed to high temperature. Do not mix new and used batteries. Do not mix batteries with different brand, capacity, voltage, or install batteries backwards.

NiMH rechargeable battery may release gas during discharge. If you experience an inflated switch boot or find high pressure being built inside the flashlight, switch off the flashlight immediately. Slowly loosen the tail-cap to reduce the internal pressure and replace all batteries.