EagleTac DX3B Mini Pro XH-P50.2 CW


Price:
Sale price$133.99 CAD

Description

EagleTac DX3B Mini XH-P50.2 CW Spec

Tactical Flashlight YES
LED Brightness Level Waterproof Specifications (Width, Length, Diameter) Weight Battery
CREE XHP50.2 K2 Cool White LED Five brightness levels IPX-8 86 mm (L)x22 mm (Body Diameter)x22.8 mm)(Head Dia.) 75 grams 18350 li-ion
Mode 1 Mode 2 Mode 3 Mode 4 Mode 5
Output Led lumen: 2480-1500 1100 420 150 25
Output ANSI FL-1 lumen: 1830-1220 910 350 125 21
Runtime 18350 li-ion (hours) 0.15-0.25 0.35 1.2 3.5 20
Runtime 18650 (w/ extension tube) li-ion (hours) 0.8-1.2 1.8 5.5 17 100

 

    • LED:CREE XHP50.2 K2 Cool White LED
    • Max output: LED lumen: 2480, ANSI FL-14 lumen: 1830
    • Reflector: Smooth aluminum reflector
    • Material: HAIII hard anodization aerospace aluminum
    • Waterproof: IPX-8 standard
    • Lens : Water white glass lens w/ harden treatment
    • LED direct soldering on copper for maximum heatsink ability
    • User replaceable glass lens
    • Battery reverse polarity protection
    • Ultra low internal resistance phosphor bronze springs (silver coated)
    • Spring loaded positive and negative terminal
    • Tail stand

    Beam Profile
    • CREE XHP50.2 K2 Cool White LED 

      • Center lux: 6,800 lux
      • Center spot angle: x°
      • Spill light angle: x°
      • Beam distance: 165 yards / 180 meters
    Five brightness levels
    • Led lumen: 2480-1500/1100/420/150/25
    • ANSI FL-1 lumen:1830-1220/910/350/125/21
    Runtime (Regular mode)
    • 18350 li-ion Runtime: (XHP50.2) 0.15-0.25/0.35/1.2/3.5/20 hours
    • 18650 (w/ extension tube) li-ion Runtime:(XHP50.2) 0.8-1.2/1.8/5.5/17/100 hours
    • Head Diameter: 0.9 inches (22.5 mm)
    • Body Diameter: 0.85 inches (22 mm)
    • Length: 3.4 inches (86 mm)
    • Weight: 2.6 ounces (75 grams, Product weight exclude battery
      • DX3B-M Pro flashlight
          • Crenulated stainless steel bezel
          • Harden stainless steel deep pocket
            two-way clip with titanium alloy dark vacuum coated finish
          • Tailstand tailcap with magnet
          • Battery extension tube for single 18650 li-ion battery
          • (US only) UL/PSE certified USB 5V 1A wall charger (100V-240V)
          • (EU only) TUV/CE certified USB 5V 1A wall charger (100V-240V)
          • Rigid nylon holster w/ self-retention device

      • 3.7V 800mAh IMR18350 rechargeable unprotected li-ion battery
      • Spare o-rings
      • User Manual
      • Mil-Spec Para-cord Lanyard w/ quick attachment clip
      • Micro USB USB charging cable ( 3.3feet / 1 meter ) w/ AWG24 copper wire
  • Ensure the protective circuit on the 18650 battery pack has current limitation of higher than 5A. Always use proven EAGTAC batteries for best performance and reliability.

    All EAGTAC flashlights are designed to use button-top battery (battery with protruding positive terminal). For rechargeable li-ion battery, use only EAGTAC li-ion battery, or other protected li-ion battery with compatible length and diameter. Before using the battery, check and ensure the battery outer wrapping (the isolating plastic film that wraps around the metal housing of the battery) is complete. Broken battery wrapping may lead to short circuit and damage to the flashlight.

    Lithium and Li-ion battery can explode or cause burns if disassembled, shorted, or exposed to high temperature. Do not mix new and used batteries. Do not mix batteries with different brand, capacity, voltage, or install batteries backwards.

    NiMH rechargeable battery may release gas during discharge. If you experience an inflated switch boot or find high pressure being built inside the flashlight, switch off the flashlight immediately. Slowly loosen the tail-cap to reduce the internal pressure and replace all batteries.  

You may also like

Recently viewed