Get FREE SHIPPING on orders over $100 before taxes OR $12 flat fee shipping across Canada only. Includes postal tracking and fully insured.
To USA: Shipping to the USA via USPS with postal tracking included.
Under $100 - First Class Shipping $14.99 | Over $100 - First Class Shipping $9.99 | Shipped in the USA for faster delivery and custom clearance.
Coming Soon - $69.99 CADCAD USD Please notify us if you want to pay in USD. We will email you a separate Paypal invoice in USD.
Dubbed as a defense flashlight, the MH1C is a small EDC flashlight that can also be used for tactical and outdoor activity use. For ultra high intensity lighting, the unit uses a premium CREE XM-L U2 LED that can shine that bright light up to 550 lumens. At this power setting the unit can go on running for a maximum of 30 minutes when used with an RCR123 battery that pushes 3.7V and banks 650mAh. It is also a truly rechargeable LED flashlight because the battery does not need to be taken out to get charged, just plug it into any USB port and that’s it.
|LED||Brightness Level||Waterproof||Specifications (Width, Length, Diameter)||Weight||Battery|
|CREE XM-L U2||2 output levels||IPX-8||109mm (Length)25.4mm (Bezel Diameter)21.5mm (Body Diameter)||63g||1xRCR123|
|ANSI/FSC||General Mode||Flashing Mode|
|Distance (120 m)|
|Intensity (3500 cd)|
|Impact Resistant (1.5 m)|
The MH1C is capable of charging a protected RCR123 Li-ion battery via the included USB cable. Simply install a protected RCR123 Li-ion cell, plugging one end of the USB cable into the flashlight and the other end into a universal USB port / adaptor and the MH1C will take care of the rest.
1. Connect the charging cable to the flashlight and the A/C power adapter to the wall outlet as shown in the adjacent image. Fully charging a depleted RCR123 battery takes approximately 2 hours.
2. Under normal charging conditions, the red indicator light near the charging port will blink twice every second.
3. If a problem is detected during the charging process, the MH1C will stop charging and the red indicator will blink rapidly. This is usually caused by faulty or incorrectly inserted batteries.
4. When charging is complete, the red indicator will illuminate steadily.
The Nitecore MH1C needs to be turned on in order to enter charging mode. You can use the non rechargeable CR123 in the Nitecore MH1C, but please do not charge these batteries. These non rechargeable batteries are not intended to be recharged and they may explode if you charge them.
All NITECORE® products are warranted for quality. DOA / defective products can be exchanged for replacement though a local distributor/dealer within the 14 days of purchase. After 14 days, all defective / malfunctioning NITECORE® products will be repaired free of charge for a period of 18 months from the date of purchase. After 18 months, a limited warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or replacement parts. The warranty is nullified in all of the following situations:
1. The product(s) is/are broken down, reconstructed and/or modified by unauthorized parties.
2. The product(s) is/are damaged through improper use.
3. The product(s) is/are damaged by leakage of batteries.
For the latest information on NITECORE® products and services, please contact your national NITECORE® distributor or send an email to firstname.lastname@example.org
Overview The D25LC2 XP G2 is equipped with the CREE XP-G2 R5 LED. It is now brighter than before with a maximum lumen power of 530 at the high mode and it can be run for an hour and a half on this setting. You can extend the runtime to 20 hours by switching to the medium power setting of 172 lumens which is still very bright. On the low setting, if you really need to draw it out, you can get it to go for 100+ hours on 5 lumens. The battery types it can use also vary and...
Olight ST25 (XM-L2, 2xAA) flashlight review, by selfbuilt Key Features: Offers five brightness levels plus strobe New, flat Stealth tailcap that allows for quiet constant on switching Side switch cycles through three brightness levels and activates strobe and turbo modes Multi-position pocket clip that allows flashlight to be quickly deployed Easily accessible lock-out feature through the side switch to prevent accidental activation From the off position, automatically return to your last brightness level with the built-in memory function or hold for instant access to 1-lumen moonlight mode If your last used mode was strobe, instantly activate with the tailcap...