Fenix HP11

by: Fenix




Overview

Spot and flood lighting achieved with a single Cree XP-G (R5)LED, that is what you get from the FENIX HP11. The Cree XP-G (R5)LED is capable of a maximum of 277 lumens and the the unit draws power from a bank of four 1.5V AA (Ni-MH, Alkaline) batteries that makes it last for 3 hours and 51 minutes at this high intensity power setting. With it you can reach a distance of 154 meters with the various modes and power levels. Most outdoor activities in the dark are covered and you can always depend on the tough construction and waterproof design.

 

Fenix HP11 Spec

LEDBrightness LevelWaterproofSpecifications (Width, Length, Diameter)WeightBattery
Cree XP-G (R5)4output levelsIPX-659.5mm (Length)x50mm (Width)x55.5mm(Height)180g
4xAA
ANSI/FSCGeneral ModeFlashing Mode
 TurboHighMidLowStrobeFrequent FlashSOS
Output (lumens)2771335542775555
Runtime3h/51min9h/31min25h206h   
Distance (154m)       
Intensity (5910 cd)       
Impact Resistant (1m)       

 

    • Cree XP-G(R5)LED with a lifespan of 50,000 hours
    • Uses four 1.5V AA (Ni-MH, Alkaline) batteries
    • Digitally regulated output - maintains constant brightness
    • Reverse polarity protection, to protect from improper battery installation
    • Dual switch system in the top, easy operation
    • The light is made of durable aircraft-grade aluminum, the rest is made of quality plastic
    • The metal part has a premium Type III hard-anodized anti-abrasive finish
    • Toughened ultra-clear glass lens with anti-reflective coating
    • Light:59.5mm (Length)x50mm (Width)x55.5mm(Height)
    • Battery Case(length):88.3mm
    • Battery Case(Width):73.5mm
    • Battery(Height):26.4mm
    • Weight: 180-gram, (excluding batteries)
    • Diffuser lens
    • Straps
    • Diffuser Len
    • 2 Cable clips
    • Battery holder
    • Manual
  • The left button is a power switch button. A single press on it can turn it on/off. The right one is a mode switch button.

    When turn on the light, it will enter into the default general mode. A fast double press on the power switch button can select between the general mode and flashing mode.

    In the general mode, a single press on the mode switch button can choose the brightness levels in the order of Turbo→Low→Mid→High→Cycle.

    In the flashing mode, a single press on the mode switch button can transfer between different flashing functions in the order of Strobe→SOS→Frequent Flash→Cycle.

    The circuit can memorize any brightness level in any mode. When turn on the light or transfer into the mode, it will directly enter into the brightness level when switched off.



Related Items